Miscellaneous Notices to Mariners
The Norwegian Hydrographic Service offers a tracing service. Tracings are supplements to the Efs notice, and are meant to aid the mariner when correcting charts and to reduce the workload.
The tracings can be downloaded from the Efs Internet service kartveket.no/efs, free of charge. The users themselves must print the tracings. It is possible to download all tracings corresponding to the latest issue of the Efs in the pdf archive.
Due to technical limitations we offer tracings for charts with WGS84 DATUM only.
3.1 Tracing User Guide
The tracings are meant as a supplement to the notices to mariners only. They should be used in conjunction with the corresponding notice.
Which notice the tracing corresponds to, is written on the lower right corner of the tracing. Which chart the tracing refers to, will also be indicated in the same area of the tracing.
An instruction video on how to use tracings is available in Norwegian.
3.1.1 Printing the Tracing
When printing the tracing, make sure the printer is set up to print with no scaling.
3.1.2 Placing the tracing
The tracing should be placed correctly on the chart primarily by means of the tracing grid. The tracing grid corresponds to the chart grid. Latitude and longitude are noted on the tracing to make it easier to place it.
The charts are printed on paper which is a living material. The size of the chart will change with the weather, and the user might observe a difference in size of the chart and the tracing.
When this error is observed the user should place the tracing by using the grid intersection closest to the object inserted, amended or deleted. If the grid intersection is too far away from the object, the tracing should be placed by means of the reference features closest to the object being amended.
If the tracing is placed in this way, the user must insure that the tracing and chart grids are parallel to each other. This is especially important when making amendments to light sectors in order to ensure that the sector angles are drawn correctly.
3.1.3 Drawing of objects
When the tracing has been placed correctly you can use the pointed end of dividers/compasses to perforate the tracing and mark in the chart where the new object should be placed.
3.1.4 Deleting objects
The deletion of an object will be shown in the tracing by use of a deletion symbol and a corresponding text. When the tracing is placed on the chart, the object to be deleted will lie directly beneath the deletion symbol.
When all the points have been marked you draw out the appropriate symbol. This symbol should be the same as the one on the tracing.